كاتب الموضوع :
mustafasst
المنتدى :
Korg pa1x pa1xpro
هلا ابو مشاري هاي الفقرة المقصودة
Drum Sample
Bank/Num
Use these parameters to select a different Drum Sample for each
layer. You can use velocity to switch between the available samples.
Offset, Reverse and Level can be adjusted independently for
the various multisamples.
The pop-up menu is where you select the bank (ROM, RAM or
EXB), while the numeric field under it is for selecting the sample
inside the selected bank. The sample name appears on its right.
The sample you select for the current layer will be triggered by
velocities higher than the value of the “Velocity Switches”
parameter (see page 196). If you do not wish to use velocity
switching, assign just one layer to the selected key, and assign a
sample only to Layer 1.
ROM The Flash-ROM bank. The internal Flash-ROM
contains 445 different samples (preset samples),
supplied by Korg as standard.
RAM RAM sample, read from the RAM. These are
user-loaded or created samples.
Note: If you create a new Drum Kit based on a
RAM sample, the RAM samples must be loaded
from disk. See “PCM Autoload” and “Load PCM
button” on page 273 (Disk mode) for information
on loading PCM samples, either at startup or with
a dedicated command.
EXB1, EXB2 EXB1 or EXB2 sample, loaded from the corresponding
optional EXB board (if installed).
|
10-06-07, 12:06 PM
جديد مواضيع قسم Korg pa1x pa1xpro
العرض العادي
